Intensifier® IP Dome Camera QUICK INSTALLATION GUIDE O2iD8 Please read this guide carefully before installation and operation of the product.
Notice Thank you for purchasing this product. This guide is designed to be a reference tool for the product. Please read it carefully before operating the product and retain it for future reference. Should you require any technical assistance, please contact Speco Technologies Technical Support. CAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.
PRECAUTIONS Please read the manual carefully before the installation in order to set up the camera correctly and to obtain the best picture quality. Installation and services should only be carried out by an authorized personnel according to local safety regulations. If any liquid or solid matter gets into the housing, immediately disconnect the camera from power supply and have it checked by your authorized dealer before reusing. Avoid installing the camera in extremely hot or cold places.
1. PRODUCT OVERVIEW Key Features 2.
Integration Physical Environment Alarm trigger Firmware Upgrade Motion detection Remote Upgrade via Network Memory Slot Power Source Power Consumption Net Weight LEDs Dimensions Operating Temperature Storage Temperature Micro SD slot DC 12V, POE (Power Over Ethernet) : 802.3af 4W 1.3lbs Power, Network Connection 4.8” (Ø) x 3.
2. NAME AND FUNCTION OF EACH PART 2.
2.2 Name and Function 1 3 4 2 NO. ITEM DESCRIPTION 1 Power Connector DC12V Caution : If camera is powered by PoE, do not plug in DC Jack with active DC power into DC power connector. 2 Network and POE Connector POE (Power over Ethernet) and LAN cable 3 Lens 3.
3. INSTALLATION 3.1 Adjust Pan, Tilt and Rotation and the Viewing Angle - Pan, Tilt, Rotate (3-Axis mechanism) Panning axis can be adjusted 360° Tilting axis can be adjusted 0° ~ 90° Rotating axis can be adjusted between +180° (clockwise) and -180° (counter-clockwise) Do not rotate more 180° as this might cause the internal cables to twist and disconnect or break. The front side of the camera Tilt 90° Tilt lever Rotation 180° Pan base - How to adjust the Viewing Angle a.
① Paste a Drilling Template on the ceiling. (or wall) ② Drill screw points which will be done for installation. Fix the plastic anchors in the holes. (in case of masonry ceiling or wall) ③ Mount the camera set by using Tapping Screws with Ø4 provided. ④ Set the position and angle of the cameras to a desired direction and assemble the dome cover.
3.3 INSTALLATION EXAMPLE 3.3.1 Installation Example LAN Switch Local Access Router Internet Remote Access E-Mail / FTP 3.3.2 Connecting to the Network Open up IP Scanner. IP Scanner can search for the device on the local network. Please note that only devices that are on the same subnet can be discovered. The device is set to DHCP mode by default. In the device list, you can view the IP address, model number, and MAC address of each device.
3.3.3 Accessing the Camera’s Web Setup Page 1) Open the browser and enter the camera’s IP address in the address bar or double click the device in IP Scanner. Enter the IP address here 2) Enter the user name and password when prompted. 3) Default user name is admin and password is 1234. 4) If prompted for installation of the Active-X plug-in, allow the installation. Active-X is needed to view video from Internet Explorer.
4.
