Flexible Intensifier® Technology Bullet IP Camera QUICK INSTALLATION GUIDE O8FD4M Please read this guide carefully before installation and operation of the product.
Notice Thank you for purchasing this product. This guide is designed to be a reference tool for the product. Please read it carefully before operating the product and retain it for future reference. Should you require any technical assistance, please contact Speco Technologies Technical Support. CAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.
PRECAUTIONS Please read the manual carefully before the installation in order to set up the camera correctly and to obtain the best picture quality. Installation and services should only be carried out by an authorized personnel according to local safety regulations. If any liquid or solid matter gets into the housing, immediately disconnect the camera from power supply and have it checked by your authorized dealer before reusing. Avoid installing the camera in extremely hot or cold places.
1. PRODUCT OVERVIEW Key Features 8.5 Mega pixel 1/2.
Audio Input / Output Network System Integration Physical Environment Security Supported Protocol Intelligent Video Alarm Trigger Video Buffer Firmware Upgrade API Power Source Power Consumption Net Weight LEDs Dimensions Operating Temperature Storage Temperature Microphone input / 1x Line-In, Line-Output / 1x Line-Out Password protection User access log HTTPS encryption HTTP, HTTPS, DNS, RTSP, RTP, TCP, UDP, ICMP, DHCP Motion detection (4 Separate blocks) Motion detection, External Input (NO / NC Type)
Junction Box Tapping Screws (Ø4 x 30) x 4 Plastic Anchor x 4 Silicone Template x 1 Junction Box x 1 Screw PH (M4 x 12) x 3 L-Wrench x 1 2.2 Name and Function 9 1 6 7 2 3 8 4 5 NO. ITEM DESCRIPTION 1 Power Connector DC12V 2 Network and POE Connector POE (Power Over Ethernet) and LAN cable 3 Sensor In / Alarm Out Sensor In / Alarm out 4 Audio-In Audio in (Red) 5 Audio-Out Audio Out (White) 6 IR LED Infrared LED 7 Lens 3.
9 BNC Analog Video Output 3. INSTALLATION 3.1 Installation overview Ceiling Ceiling Tile Drilling Template Plastic Anchor x 3 Camera Ass'y Tapping Screw (4 x 30) x 3 L-Wrench Top Cover Ass'y ① ② ③ ④ ⑤ ⑥ Paste a Drilling Template on the ceiling or wall and drill screw points which will be dome for installation. Fix the Surface Mounting Base by using Tapping Screws provided. Fix the Flush mount Base on Surface Mounting Base. Turn the camera Ass’y to the desired direction.
Ceiling_Junction Box Ceiling Tile Drilling Template (Silicone) Plastic Anchor x 4 Junction box Tapping Screw (4 x 30) x 4 Camera Ass'y PH (M4 x 12) x 3 L-Wrench Top cover Ass'y 3.2 3-Axis Adjustment Tilt 65° Tool-free 3-Axis mounting mechanism Perfect Tri-axis! Panning axis up to 326° degree. Tilting axis up to 65° degree. Rotation axis up to 180° degree.
3.3 INSTALLATION EXAMPLE 3.3.1 Installation Example LAN Switch Local Access Router Internet Remote Access E-Mail / FTP 3.3.2 Connecting to the Network Open up IP Scanner. IP Scanner can search for the device on the local network. Please note that only devices that are on the same subnet can be discovered. The device is set to DHCP mode by default. In the device list, you can view the IP address, model number, and MAC address of each device.
1) Open the browser and enter the camera’s IP address in the address bar or double click the device in IP Scanner. Enter the IP address here 2) Enter the user name and password when prompted. 3) Default user name is admin and password is 1234. 4) If prompted for installation of the Active-X plug-in, allow the installation. Active-X is needed to view video from Internet Explorer.
4.
