Supplementary Document

4-3. Setup – Record Mode

In the Setup menu, select the Record tab. Then, the Record menu is displayed as pictured below. Navigate

through the menu items or change the settings using the mouse or the remote control.

Figure 4.3.1. Record Setup Screen

Table 4.3.1. Menu Items in Record Setup Screen

Menu Item

Description

Site

Select a channel for applying the following settings using a mouse or a remote

control. Select the “select” button beside of channel button to change the values of all

channels.

Resolution

Select 1920x1080, 1920x540, 1280x720 and 640x360 using a mouse or a remote

control.

Frame Rate

Set the frame rate for the specified channel. The sum of the frame rate values per

channel cannot exceed the maximum frame rates for a specific recording resolution.

Quality

Select the recording quality for the selected channel. Options are;

Level 1 (Low), Level 2, Level 3, Level 4, and Level 5 (High)

Recording

Mode

Assign the recording mode for the selected channel. Options are: Continuous, Motion,

Sensor, Schedule, Disable and Smart Recording (c + m : continuous & motion, c + s :

continuous & sensor)