Quick start Guide

8
4.2 Camera Setup
The NVR supports plug and play for IP cameras through the built-in PoE ports.
If desired, you can can scan for IP cameras that are on the same local network through the EZ Camera feature.
To add cameras, right click and then click on Main menu->Setup->Camera->Site Locate. See Figure 4-2.
Figure 4-2
Click Device Search to find cameras on the local network.
Double click on a camera to add it to the NVR.
4.3 Schedule Setup
To set up schedule recording, go to Main Menu->Setup->Storage->Schedule. See figure 4-3
 Channel: Select the desired channel number first. You can select “all” if you want to set the schedule for all of the
channels.
 : Select icon of multiple days to link them together. This will allow the linked days to be edited
simultaneously.
 : Click to delete the schedule for the selected recording type from one period.
 Recording Type: Check the box of the desired recording type. There are three modes for recording: Continuous /
Motion detection / Sensor.