Quick start Guide

7
4. EZ Setup
After the system boots up, the EZ Setup wizard is displayed. See Figure 4. If not, right click, and select EZ Setup.
Figure 4
Tip: Check the “Startup” box to display the EZ Setup wizard every time the device is rebooted.
4.1 General Settings – Date & Time
Go to Main menu->Setup->System->General, shown in Figure 4-1
 System Time: Set the time and date format of the system
 DST: Set the start and end dates for Daylight Saving Time. DST must be enabled to use this function.
 Time format: Choose between 24-hour mode or 12-hour mode.
 NTP: Specify an NTP server to synchronize the time.
Figure 4-1