Quick start Guide

11
Figure 4-5
4.5 Playback
Right click and select Main Menu->Search to bring up the playback interface as shown in Figure 4-6. From this screen,
you can access EZ Search as well as searching by timeframe.
To use EZ search, perform the following:
1. Click on single view mode
2. Choose the stream type (M=mainstream, S=substream) and channel number. Note: the mainstream is usually
the higher resolution output of the cameras.
3. Click on EZ search
4. Thumbnails at timed intervals will appear, click on the interval you want to view. Click “Exit” on the lower right
to Exit thumbnail view.
Figure 4-6
Tip: Check the “Sync” box to sync cameras to the same time index during playback.