Quick start Guide

9
 Week day: There are eight options: ranges from Saturday to Sunday and all.
 Holiday: Special schedules can be set for holidays if needed. Holidays must be added manually. To add a holiday, go
to Main Menu->Setup->System->General->Holiday. This option will not be shown if no holidays have been added.
 Pre-record: This option is to set up the pre-record interval for events. The range is from 1 to 30 seconds.
 SD Backup: For supported IP camera models, the video can be recorded to an SD card in case the network
connection fails. The time range is from 0 to 43200 seconds. After the network connect ion resumes, the NVR will
retrieve the video from the SD card.
 Period setup: Click to bring up the interface to enter a time period manually.
Follow the steps listed below to visually draw the period.
a) Select the desired channel.
b) Set the recording type.
c) Click and drag. See Figure 4-3. Note: for all schedules, a maximum of 6 separate periods can be specified for a
day.
Figure 4-3
After completing setup, click Apply to save the settings.