Supplementary Document

4-5. Setup – DISPLAY Mode

In the SETUP menu, select the DISPLAY tab. Then, the DISPLAY menu is displayed as pictured below.

Navigate through the menu items or change the settings using the mouse or the remote control. To return to

the previous setup menu screen, press the ESC button.

Figure 4.5.1. DISPLAY Setup Screen

Table 4.5.1. Menu Items in DISPLAY Setup Screen

Item

Description

OSD

Enable/Disable on-screen-display.

(Channel Name, Video Loss, Status Bar / Icon)

OSD CONTRAST

Set the visibility level of the On Screen Display (OSD) (0~100)

MAIN MONITOR

SEQUENCE

Enable/Disable sequential display of video in full screen mode.

SEQUENCE

DWELL TIME

Set the dwell time of each,

single channel display in sequential display mode (3~60 seconds)

SITE

Select a channel to apply the name and covert settings change using the

mouse or the remote control.

Select a channel to apply the following settings using the mouse.

NAME

Set the channel name. Press the right square button and set the channel

name and select OK using the mouse.

The name can be made up to 36 characters.

COVERT

Enable/disable display of the specified video channel in live display.

VIDEO OUTPUT

Select 1280x720 or 1920x1080.