Quick start Guide

USER MANUAL
Handle the unit gently as rough physical handling may cause malfunction.
8. Use standard lithium battery
After disconnecting power, if the system clock does not continue to work, please replace the
standard 3V lithium battery on the main board.
Warning:
Turn off the unit before replacing the batteries. Please properly dispose of the used
batteries.
9. Put the equipment in a place with good ventilation
The recorder can produce a large amount of heat during operation. Install or put the
equipment in a place with good ventilation.
10. The included power adapter can only be used for the single recorder. Do not connect
more equipment to the power adapter.
11. Prevent water from splashing on the equipment. Do not place objects containing water
on the equipment.
12. Electrical safety
All installation and operation here should conform to local electrical safety codes. The product
must be grounded to reduce the risk of electric shock. Speco Technologies assumes no
liability or responsibility for all the fires or electric shock caused by improper handling or
installation.
13. Qualified personnel
All examination and repair work should be done by the qualified service personnel. Speco
Technologies is not liable for any problems caused by unauthorized modifications or
attempted repair.