Quick start Guide

USER MANUAL
Important Safeguards and Warnings
Please carefully read the following instructions to avoid personal injuries and prevent the equipment
and other devices from being damaged.
1. Power source (note: please use the power supply that was included)
Never operate the equipment by using an unspecified power supply.
1. Never push objects of any kind through the openings on the recorder
Never push objects of any kind through the openings on the NVR to avoid electric shock or
other accidents.
2. Avoid dusty areas
Do not put the equipment in a dusty area.
3. Do not place the equipment in a rainy or humid environment
Do not place the recorder in a humid environment like a basement. If the equipment comes
accidentally in contact with water, please unplug the power cable and immediately contact
support.
4. Keep the surface of the equipment clean and dry
Use a soft, damp cloth to clean the outer case of the recorder (do not use liquid aerosol
cleaners)
5. Do not operate if any problems are found
If there are any strange smell or sounds coming from the recorder, unplug the power cable
and contact support.
6. Do not try to remove the upper cover
Warning
: Do not remove the cover of the recorder while power is connected, to avoid electric
shock.
7. Handle with care