Quick start Guide

USER MANUAL
59
5.6.4.3 Upgrade
1. Copy the firmware file (.sw file) to the USB flash drive and insert the flash drive into the NVR’s USB
port.
2. Click the Select File button to choose the firmware file in the USB flash drive, and then Click
OK
.
3. Click the
Upgrade
button to start the system upgrade. The system upgrade will last around 5-10
minutes. Do NOT power off the NVR or remove the USB from the NVR during this process.
5.6.4.4 Parameter Management
Export the main menu settings to a USB flash drive or import settings from a flash drive to the
NVR.