Quick start Guide

USER MANUAL
50
5.6.1.2 NTP Settings
The NTP (Network Time Protocol) function allows the NVR to automatically sync its clock with a time
server over the Internet. This gives it the ability to constantly have an accurate time setting (the NVR
will periodically sync automatically).
5.6.1.3 DST Settings
DST (Daylight Saving Time) configuration.
Enable DST
: If Daylight Saving Time applies to the time zone or region, check this option.
Time Offset
: Select the amount of time that Daylight Saving has increased by in the time zone. This is
typically 1 hour.
Check to enable the NTP, and select a Server
Address, click Update Now to manually sync
the date & time.
Click Apply to save the settings.