Quick start Guide

USER MANUAL
46
Conveyance:
This is a very quick test that verifies that the mechanical parts of the hard drive are
working.
Note: When performing a test, the NVR will continue to work as normal. If an HDD S.M.A.R.T error is
found, the HDD can continue to be used, but there will be a risk to lose recording data. At this point,
the HDD may have to be replaced. Contact support when this occurs.
5.5.2 Cloud
Dropbox can be used to upload snapshots for motion alarms. Note that email must be configured and
the HDD must have free space in order for Dropbox to work properly.
Cloud Storage: Check to enable the Dropbox function.
Alarm Detection: Check to enable Dropbox uploads for the specified channel.
Driver Name: Custom name for the channel for indication on the uploaded file name.
Activate Cloud: Click to send an authentication email to the receiver email address that was
specified in the email configuration section.
Note: When the Activate Cloud button is pressed, an email will be sent to the receiver email address
with a link to authenticate the NVR with Dropbox. Make sure that the PC that’s accessing the link is on
the same local network as the NVR. Click on the link to bring up this screen: