Quick start Guide

USER MANUAL
39
Check the “Enable PPPOE” box and then enter the User name & Password of PPPoE.
Click
Apply
to save and the system will reboot to activate the PPPoE setting.
5.4.1.3 Port Configuration
Web Port
: This is the port that will be used to log in remotely to the NVR (e.g. using the Web Client). If
the default port 80 is already taken by other applications, please change it.
Client Port
: This is the port that the NVR will use to send information through. If the default port 9000
is already taken by other applications, please change it.
RTSP Port:
This is the port that the NVR uses to transmit real-time streaming to other devices. If the
default port 554 is already taken by other applications, please change it.
UPNP
: To log in remotely to the NVR using a web browser through DDNS, port forwarding must be set
up in the router. Enable this option if the router supports UPnP. UPnP must be enabled on both the
NVR and the router. If UPnP is used, port forwarding does not have to be configured manually on the
router. If the router does not support UPnP, make sure port forwarding is configured manually.