Quick start Guide

USER MANUAL
32
Bitrate Mode:
To set a custom bitrate value, choose the
User-defined
mode. To have the system set
a recommended bitrate value based on the selected resolution of the stream, choose the
Predefined
mode.
Bitrate:
Set the bitrate value. Note that higher bitrate values will result in higher image quality, but will
also consume more storage space on the HDD.
5.2.2 Record
Configuration of the channel recording parameters.
5.2.2.1 Record
Record Switch
: Check to enable recording for the channel.
Stream Mode
: Choose the recording quality. If DualStream is chosen, the system will record both the
main stream and the sub stream.
PreRecord
: If this option is enabled, the NVR will store recorded video a few seconds before a motion
event occurs.