Wide Dynamic Range Dome Camera WDR-D3 200 New Highway Amityville, NY 11701 631-957-8700 www.specotech.com Please read this manual thoroughly before operation and keep it handy for further reference.
WARNING & CAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO US E R S E R V I C E A B L E P A RT S I N SIDE REFER SERVICINGTO QUALIFIED SER V ICE PERSONNEL.
CAMERA INSTALLATION CONNECT POWER CABLE 1. WHEN USING 12 VOLTS DC (constant voltage 600 mA) POWER INPUT:RED CONNECT CENTER:(+) POWER SUPPLY 2. WHEN USING 24 VOLTS AC (40 Volt Amps) POWER RED(+) CONNECT BLACK:(-) 3. CONNECT VIDEO CABLE -CONNECT BNC CABLE TO THE BNC JACK.
CHAMELEON DOME INSTALLATION 3. If desired, place the Chameleon Dome over the WDR-D3 Push the Chameleon Dome over the WDR-D3 until it snaps into position.
INTERNAL COMPONENTS 1. Mechanical (2) JOY STICK (1) DC Auto iris 2.8~10mm Lens (1) DC AUTO-IRIS LENS Adjust between TÅÆW (TELE ÅÆ WIDE) to set the angle (focal length) Set the focus by adjusting ∞ÅÆN NOTE: BOTH OF THE ABOVE ADJUSTMENTS GET LOCKED INTO POSITION THROUGH THE USE OF "LOCKING HANDLES".
2. Joy Stick UP RIGHT LEFT DOWN Push the Joy stick for one second, and the OSD appears on the screen. Move the Joy Stick up, down, left & right to control the OSD functions.
1. GENERAL INFORMATION SAFETY PRECAUTION ■ Do not open and modify Do not open the cabinet except during maintenance and installation, as it may be dangerous and cause damage. ■ Do not put objects inside the unit Make sure that no metal objects or flammable substances get inside the camera. It could cause fire, short-circuits or damages.
3. CAMERA FEATURES PRODUCT FEATURE 1. High Resolution It has 540 lines of horizontal resolution and 460 lines of vertical resolution. (540 HTVL equivalent) 2. Superior Wide Dynamic Image Quality It has very Wide Dynamic Range by using Pixim ORCA Chip Set. Film-like colors are described under various Light conditions even in high dynamic range scenes Dynamic Range is greater then 120 dB. 3. Digital Pixel System Each pixel is processed independently to get clear and usable images. 4.
4. CAMERA SPECIFICATION Signal System NTSC / PAL Pick-up Device 1/3 inch CMOS (dramatically Dynamic range sensor) Total of pixels 742(H) x 552(V) Horizontal Resolution 520 Horizontal TV Lines (color) Scanning System 525 Iines interlaced / 625 Iines interlaced Synchronization Internal / External Video Output 1.0Vp-p/75 ohm Composite Iris Control DC Lens, Video Lens, Manual Lens Sensitivity 0.08Lux (DSS on) with F1.
5.
OSD MENU CONTROL CENTER KEY - Used to access the menu mode, Also used to confirm the setting UP / DOWN KEY - Used to choose the desired menu selection. LEFT / RIGHT KEY - Used to choose the desired menu feature adjustment. OSD MENU ENTER / EXIT A. OSD MENU ENTER • Push Center Key for 2 seconds B. OSD MENU EXIT • Press EXIT Menu from Main Menu • If Pressing Set Key for 2 seconds from Main Menu appears. In this case, just press Set Key. C.
E. WB CONTROL • ATW (Auto Tracking White Balance) : The camera automatically control the white balance in any environment. • AWB (Auto White Balance) : The white balance is automatically adjusted in a specific environment. • MANUAL : Users can adjust the colors by adding or reducing the WB level. You can adjust the desired WB level from 2K to 11K F. AGC • ON : Activate automatic gain control feature. You can adjust the desired AGC level from 0 to 60dB. • OFF : Deactivate automatic gain control feature. G.
DIMENSIONS 80.00 150.00 * SIDE VIEW : WDR-D3 180.00 120.
WARRANTY
200 New Highway Amityville, NY 11701 631-957-8700 www.specotech.
