VLB11SCSFF 550 Line Color Bullet Camera Focus Free Wall & Ceiling Mountable Please read this manual thoroughly before operation and keep it handy for further reference.
WARNING & CAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO US E R S E R V I C E A B L E P A RT S I N SIDE REFER SERVICING TO QUALIFIED SER V ICE PERSONNEL.
CONTENTS Package Contents 4 Precautions 5 Camera Installation 6-9 Features 10-11 OSD Menu Tree 12 OSD Menu Details 13-15 Troubleshooting 16-17 LED Pattern 18 Specifications 19 Dimensions 20 Warranty 21 3
PACKAGE CONTENTS Please make sure that the following items are included in the package: 1 VLB11SCSFF Camera 3 Mounting Screws 1 Video test Connector 1 Wrench Please leave this manual with the end-user for future reference.
PRECAUTIONS • THIS CAMERA SHOULD BE ONLY INSTALLED BY QUALIFIED PERSONNEL • TO PREVENT A FIRE OR ELECTRICAL HAZARD PLEASE USE PROPER POWER CABLE • DO NOT CLEAN THE COVER WITH AN ABRAISIVE CLEANING MATERIAL - PLEASE USE A SOFT CLOTH OR TISSUE TO CLEAN THE COVER • THERE ARE NO USER-SERVICEABLE PARTS INSIDE.
CAMERA INSTALLATION CONNECT POWER CABLE 1. WHEN USING 12 VOLTS DC (constant voltage 500 mA) Power Input :RED Center : (+) DC 12V Power Supply 2. CONNECT VIDEO CABLE -CONNECT BNC CABLE TO THE BNC JACK.
CAMERA INSTALLATION CONTROL BOARD 2 3 1 1) Video Test Terminal For second video output 2) OSD (On Screen Display) Joy stick Press the Joy stick for one second until the OSD menu tree appears on the screen. Move the Joy Stick up, down, left & right to control the OSD functions. 3) Lens adjustment (for Zoom) Joy stick Adjust the Joy stick left or right to control between TELE & WIDE, Focus is automatically matched without any adjustment.
CAMERA INSTALLATION COMPATIBILITY “A” type Box “B” type Box CVCTPEXT CVCTPLATE [CVCTPLATE Hole Description] Hole 1 : CVCTPEXT Hole 2 : Electrical Box “B” type Hole 3 : Electrical Box “A” type 8
CAMERA INSTALLATION COMPATIBILITY BCP ( USING 7246WMT) CVCTPEXT CVCTPLATE BCP (Direct connection ) 9
FEATURES FOCUS FREE With 3.7~10mm FOCUS FREE Auto Iris Motorized Zoom Lens, Focus can be automatically set up by adjusting zoom position. No more trips back to the installation to re-focus the camera. Reduces installation time and service calls. High Resolution Horizontal resolution of 550 TV lines is achieved by using a SONY Super-HAD CCD with 410,000 pixels, and a custom DSP yielding pictures with a high S/N ratio.. DAY/NIGHT The camera can show color pictures in all lighting conditions.
FEATURES HLC (High Light Compensation) This function reverses bright spots in the picture (such as headlights). It enables the entire system to do a better job of resolving and displaying grayscale information such as a license plate. FREEZE This function freezes the current scene for detailed viewing. PRIVACY It also has the ability to mask up to 8 areas of the picture where Viewing is not desired.
OSD MENU TREE LENS ◆ DC EXPOSURE SLC ◆ SHUTTER ◆ AGC ◆ SLC ◆ S-WDR ◆ RETURN HLC WHITE BALANCE ◆ ATW ◆ AWB ◆ AWC-SET ◆ MANUAL ◆ INDOOR ◆ OUTDOOR DAY / NIGHT ◆ COLOR ◆ AUTO ◆ EXT ◆ B/W S-DNR ◆ ON ◆ OFF SPECIAL ◆ CAM TITLE ◆ D-EFFECT ◆ MOTION ◆ PRIVACY ◆ RETURN / END FREEZE MIRROR D-ZOOM GAMMA NEG.
OSD MENU DETAILS 1. EXPOSURE [OPTION : SHUTTER / AGC / SLC / S-WDR / RETURN] - SHUTTER 1/60, FLK, 1/250, 1/500, 1/2000, 1/5000, 1/10000, 1/100000 - AGC (Low / Middle / High) Adjusts value of AGC gain and increases the GAIN level to brighten the picture. (noise / distortion may develop) - SLC * SLC : Back Light Compensation * HLC : High Light Compensation - S-WDR (Digital Wide Dynamic Range) To distinguish a subject in both bright and dark areas. * INDOOR : Activate S-WDR for Indoor use.
OSD MENU DETAILS 3. DAY / NIGHT [OPTION : COLOR / BW / AUTO] - COLOR : Full time color mode - BW : Full time black & white mode - AUTO: Automatically detect color or black/white * DELAY : Set Delay time to switch Color to B/W. * S-LEVEL : Set Start Level of luminance that you define. * E-LEVEL : Set End Level of luminance that you define . *** Only certified technicians should be allowed to this feature. 4. S-DNR [OPTION : ON / OFF] - Reduces noise/distortion on the screen.
OSD MENU DETAILS 6. SPECIAL – D-EFFECT [OPTION : FREEZE / MIRROR / D-ZOOM / GAMMA / NEG.IMAGE] - FREEZE: Freezes the current scene for detailed viewing. MIRROR – ROTATE, V-FLIP, MIRROR D-ZOOM : Digital zoom of 1 ~32X. GAMMA : 0.45 is fixed. Do not adjust it unless certified technician. NET. IMAGE : Change colors off like film. 7.SPECIAL - MOTION [OPTION : ON / OFF] - To transmit a alert signal when it detects motion of an object on the screen. 4 Areas can be selectable. 8.
TROUBLESHOOTING If you have trouble operating your camera, refer to the following Problem Nothing appears on the screen. Solution ● Check that the power cord and line connection between the camera and monitor are correct ● Check that you have properly connected VIDEO cable to the camera VIDEO output jack. The image on the screen is dim. ● Is the lens stained with dirt? Clean your lens with soft, clean cloth. ● Set the monitor for the proper conditions.
TROUBLESHOOTING Problem Solution The color of the picture is not proper. ● Check that you have properly set the ‘ WHITE BALANCE ’ menu The image on the screen flickers. ● Is the camera facing to direct sunlight or fluorescent lighting? Change the camera position.
LED PATTERN 3.
SPECIFICATIONS ITEM VLB11SCSFF Power Source 12VDC Only Power Consumption 600mA (DC) Image Sensor 1/3”, SONY SUPER HAD CCD, Total Pixels 811(H) x 508(V) , 1/3” CCD Effective Pixels 768(H) x 494(V) , 1/3” CCD LENS TYPE Focus Free Lens 3.7~10mm Maximum Aperture Ratio 1 : 1.3 ~2.0 Scanning System 2 : 1 Interlaced 525 Lines / 60 Fields / 30 Frames 410,000 pixels Synchronization Internal Video Output 1.
DIMENSIONS * FRONT VIEW * SIDE VIEW 20
WARRANTY 21
MEMO
MEMO
200 New Highway Amityville, NY 11701 631-957-8700 www.specotech.com VER. 090706 This manual is based on the date as shown in the right and specifications are subject to Change without notice for quality improvement.
