Home Security System User Manual

1-4
1.2.2 Connector Description
① 12 Volts DC Power Input
② Audio Output
③ Audio Input : The SIP Camera supports one audio input and output
④ Ethernet Port : Standard RJ45 connector. Supporting POE.
⑤ Reset Button (** Please open the case for the Bullet / Dome type camera )
Step 1 : Switch off SIP Camera by disconnecting the power cable.
Step 2 : Using a suitable pointed object, press and continue to hold the Reset
Button. While continuing to hold the reset button, reconnect the power cable.
Step 3 : Keep holding the reset button for 6 seconds, release the reset button.
The unit will start up with factory default settings.
⑥ LED Light level controller