User Guide
Installation
3
* Before you start, please make sure that the wall or ceiling is strong enough
to withstand three times the weight of the camera.
① Open the mounting base and the upper cover of the junction box.
④
the camera onto the mounting base.
Mount the rubber plug to the gap of the mounting base and fasten
Mounting Base
Upper Cover
8mm
PA
4×
25
mm
Rubber o-ring
4×
② Attach the drill template of the junction box to the place where you
want to install the junction box and then rill the screw hole and calbe
hole on the wall according to the drill template.
③ Install junction box onto the wall by using the screws provided.