User Guide

* 1 It is recommended to install the water-proof connector for outdoor installations.
* 2 DC 12V/AC24V power supply is not required if a PoE switch or injector is used
to power the camera.
► Connecting Network Cable
① Loosen the nut from the main element.
② Run the network cable (without RJ 45 connector) through both
elements. Then crimp the cable with RJ 45 connector.
③ Connect the cable to the water-proof connector. Then tighten the
nut and the main cover.
2
1
3
Water-proof connector
1--ALM-COM
2--ALM-OPEN
3--ALM-INA
4--ALM-GND
12VDC/24VAC
ALARM
4 3 2 1