User's Manual

SMT User Manual

Live View Introduction

Select the camera, enter the camera name (or double click the camera name in the camera list to

change the camera name), enable or disable the name and time OSDs (if enabled, drag the red

name and time OSDs directly in the image view area to change the OSDs’ display position) and

select the date and time formats. Click “Apply” to save the settings.

5.2.2 Image Settings

Click StartSettingsCameraImageImage Settings to go to the following interface.

Select the camera and then set the brightness, contrast, saturation and hue of the camera. Click

the “Advanced” button or in the camera list on the right side of the interface to pop up the

“Image Adjust” interface and then set the relevant setting items. Please refer to 5.2.3 Image

Adjustment for detailed introductions of these items.

You can click “Default” to restore the image settings to the default factory settings.

5.2.3 Image Adjustment

Go to live preview interface and then click button on the tool bar under the camera