User's Manual

SMT User Manual

Live View Introduction

5 Live View Introduction

5.1

Live View Interface Introduction

You should add IP cameras/panels first after logging on to the system (see 4.1.1 Add Camera

for details). Refer to the interface as shown below, drag one camera in the preview window to

another window for camera window exchanging. Click button and then you can view the

record symbols. The record symbols with different colors in the live preview window refer to

different record types when recording: green stands for manual record, red stands for sensor

based record, yellow stands for motion based record, blue stands for schedule record and cyan

stands for intelligence record.

Click the preview window to show the tool bar as shown in area ①; right click the preview

window to show the menu list. The tool bar and menu list are introduced in the table below.

Button

Menu List

Meaning

Move tool. Click it to move the tool bar anywhere.

Manually Record On

Click it to start recording.

Instant Playback

Click to playback the record; click “Instant Playback” to select

or self-define the instant playback time. See 10.1 Instant Playback

for details.

Enable Audio

Click it to enable audio. You can listen to the camera audio by

enabling audio.

Original Proportions/

Overspread window

Click it to select the display proportion of the window.