User's Manual

SMT User Manual
Remote Surveillance
108
Button
Meaning
Screen display mode
Click to disable OSD; click it again to enable OSD
Full Screen
Backup start time button. Click the time scale and then click it to set the
backup start time.
Backup end time button. Click the time scale and then click it to set the
backup end time.
Backup button.
Backup tasks button. Click it to view the backup status.
Event list button. Click it to view the event record of
manual/schedule/sensor/motion.
Stop button.
Rewind button. Click it to play video backward.
Pause button.
Play button. Click it to play video forward.
Deceleration button. Click it to decrease the playing speed.
Acceleration button. Click it to increase the playing speed.
Previous frame button. It works only when the forward playing is paused
in single screen mode.
Next frame button. It works only when the forward playing is paused in
single screen mode.
Click to step backward 30s and click to step forward 30s.
14.4.6 Search and Backup via Web Client
Click “Search and Backup” in the remote interface to go to the backup interface. Please refer to
10 Playback & Backup for details.
14.4.7 Settings via Web Client
Click “Settings” in the live display interface and then configure the camera, record, alarm, disk,
network, account and authority and system of the SMT remotely. All of these settings are
similar to that of the SMT. See the configurations of the SMT for details.
Local Settings: click it to change the local settings. Set the snapshot number and click “Browse”
to set the snapshot path and record path as shown below. Click “Apply” to save the settings.