User's Manual

SMT User Manual

Remote Surveillance

14.1

Mobile Client Surveillance

① Enable NAT in the SMT. Refer to 13.1.8 NAT Configuration for details.

② Download and install the mobile app “Speco Blue” into the mobile device with the

Android or iOS system.

③ Run the mobile client, go to the “Add Device” interface and then click to scan the

QRCode of the SMT (Click in the live display interface to view the QR code).

④ After scanning the QRCode successfully, enter the login password to log in mobile client.

14.2

Web LAN Access

① Click StartSettingsNetworkTCP/IP to go to the “TCP/IP” interface. Set the IP

address, subnet mask, gateway, preferred DNS and alternate DNS of the SMT.

② Open a web browser on your computer, enter the IP address of the SMT in the address bar

and then press enter to go to the login interface as shown below. You can change the display

language on the top right corner of the login interface. Enter the username and password of the

SMT in the interface and then click “Login” to go to the live preview interface.