User's Manual

SMT User Manual
Device Management
87
Check “Enable” and then select the DDNS type. Enter the server address, domain name,
username and password according to the selected DDNS type. Click “Test” to test
the effectiveness of the input information. If “www.autoddns.com” is selected, you need to
enter the domain name only and then click “Register” to register the DDNS name. Click
“Apply” to save the settings.
Then you can use you this domain name to access the device remotely.
13.1.5 E-mail Configuration
Click StartSettingsNetworkE-mail to go to the following interface.
Enter the sender’s name, e-mail address, SMTP server and SMTP port (you can click “Default”
to reset the SMTP port to the default value) and then enable or disable the SSL and attaching
image. Select the username (the username list will be updated automatically according to the
email address you enter) and enter the password of the sender and then click “Apply” to save