User's Manual

SMT User Manual
Device Management
86
API Server: You can log in the media player which supports the RTSP protocol. Moreover, the
third-party can further develop through API service.
Authentication: Basic authentication and digest authentication are optional.
RTSP Port: RTSP real-time stream protocol can be used to control the sending of real-time
data. By media player (like VLC player) which supports the RTSP real-time stream protocol,
you can view the live images synchronously. The default RTSP port is 554 and it can be
changed as needed. (The address format: rtsp://IP address:554/chID=1&streamType=main or
rtsp://IP address:554/chID=1&streamType=sub; main indicators main stream; sub indicators
sub stream; chID indicators channel ID).
Example: Enable RTSP and “Anonymous”. Then open the VLC player and enter the address
(for example: rtsp://192.168.1.88:554/chID=1&streamType=main) in the network address bar
of the VLC player. Then you can view the video of channel 1.
13.1.3 PPPoE Configuration
Click StartSettingsNetworkPPPoE to go to the interface as shown below. Check
“Enable” in “PPPoE Settings” and then enter the username and password obtained from the
dealer. Click “Apply” to save the settings.
13.1.4 DDNS Configuration
The DDNS is used to control the dynamic IP address through domain name. You can access to
the SMT easily if the DDNS is enabled and configured.
Click StartSettingsNetworkDDNS to go to the interface as shown below.