User's Manual

SMT User Manual
Device Management
83
13.1.2 Port Configuration
Click StartSettingsNetworkPort to go to the interface as shown below. Enter the HTTP
port, HTTPS port and server port of the SMT, and then click “Apply” to save the settings. You
can also enable and set RTSP port (please check “Anonymous” as required).
HTTP Port: the default HTTP port of the SMT is 80. The port number can be changed to others
like 81. The port is mainly used to web client access. If you want to access the SMT through a
web browser, you should enter IP address plus HTTP port in the address bar of the web
browser like http://192.168.11.61:81.
HTTPS Port: the default HTTPs port of the SMT is 443.
HTTPs provides authentication of the web site and protects user privacy. How to use it?
① Enter IP address plus HTTP port in the address bar of the web browser. Then enter
username and password to log in. Click Functional PanelNetworkHTTPS to go to the
following interface.