User's Manual

SMT User Manual

AI/Event Management

② Enable or disable “Record”, “Snapshot”, “APP Push”, “Alarm-out”, “Buzzer”, “Pop-up

Video” and “E-mail”. The alarm handling setting of motion alarm is similar to that of the

sensor alarm (see 11.3 Sensor Alarm for details).

③ Click “Apply” to save the settings. You can click “Motion Settings” to go to the motion

configuration interface.

11.5

Combination Alarm

① Click StartSettingsAI/EventCombination Alarm to go to the following interface.

② Customize combination alarm. Set alarm name and click “Configure” under the Combined

Alarm Configuration item. Then select alarm type and alarm source. Finally, click “OK” to

save the settings.

③ Enable or disable “Record”, “Snapshot”, “APP Push”, “Alarm-out”, “Buzzer”, “Pop-up

Video” and “E-mail”. The alarm handling setting of combination alarm is similar to that of the

sensor alarm (see 11.3 Sensor Alarm for details).

④ Click “Apply” to save the settings.