User's Manual

SMT User Manual
AI/Event Management
66
11 AI/Event Management
11.1 Body Temperature Settings
Click StartSettingsAI/EventTemperature/Mask to go to the following interface.
Please select Celsius or Fahrenheit temperature as needed.
Threshold: Please set the temperature threshold. If the body temperature measured exceeds this
threshold, it will trigger alarm. Over temperature will be shown on the captured face picture
and the alarm information will be shown under the real-time warning tab of the live display
interface.
11.2 Mask Settings
Click StartSettingsAI/EventTemperature/Mask to go to the following interface.
After turning on the button, the non-mask detection results of the IP panels/cameras will be
received by the device and trigger an alarm. In live view mode, you will view the non-mask
alarm information (“mask off”) displayed under the captured face picture in the intelligent
detection interface and real-time warning interface.
Note: Before using this function, please ensure that mask detection is supported by the added
IP panels/cameras and it has been enabled.