User's Manual

SMT User Manual

Playback &Backup

Switch Camera

Click it to switch the playback camera. Click it and then check the

camera in the popup window. Click “OK” to change the camera.

Close Camera

Click it to close the playback camera.

Introduction of area ④:

Click to set the date; click to set the time and then the playback camera will play the

record from the time you set. You can check the record type as required for record playback;

first you should click on the tool bar at the bottom of the interface to clear all the playback

camera, then check the record type ( : manual record; : sensor based record; :

motion based record; : schedule record; : intelligence record) and finally click in

the playback window to add camera for playback (the record time scale will show the record

data of the checked record type only after the above operations).

Introduction of the record time scale (area ⑤):

A tool bar will appear after moving the mouse to the record time scale. Click / to

zoom the timeline; click to recover the timeline to 24 hours’ ratio. Drag the timeline or

slide the scroll wheel of the mouse on the time scale to show the hidden time on the top or

bottom of the timeline. You can also click to show the hidden time on the top of the

timeline or click to show the hidden time on the bottom of the timeline. Drag the slider

at the bottom of the time scale to show the hidden playback cameras.

The record time scale shows different record types with different colors. The green block

stands for manual record, red block stands for sensor based record, yellow block stands for

motion based record, blue block stands for schedule record and cyan block stands for

intelligence record. Click the record block to set the time and then the playback camera will

play the record from the time you set.

Backup Introduction:

Insert the storage device into the device. Drag on the color block of the time scale to select the

backup area and then right click the area or click to pop up a backup information window.

Click the “Backup” button in the window to pop up the backup window. Select the device,

backup path and backup format and then click the “Backup” button.

10.3

Record Search, Playback & Backup

The record data and the snapped pictures can be backed up through network, USB (U disk or

USB mobile HDD). The file system of the backup devices should be FAT32 format.

10.3.1 Pass-Through Record Search

Click StartSearch and BackupPass-Through Records to go to the following interface.