User's Manual

SMT User Manual
Record & Disk Management
54
There is one disk group.
The added cameras will be added into the group automatically.
Click in the disk or camera row to pop up a window. Check the disks or cameras in
the window and then click “Add”.
For the model with 2 HDD slots, BK group can be added as shown below.
Click to add the backup HDD. After account verification, select a HDD and then
this HDD will be removed from the normal group to the backup group. Simultaneously, it will
be formatted. Please back up all data of this HDD in advance when you want to remove it to
the backup group.
You can add cameras to this HDD. The added cameras can exist and be recorded both in one
HDD of the normal group and the backup group.
Note: Each HDD only can exist in one group.
9.5.3 View Disk and S.M.A.R.T. Information
Click StartSettingsDiskView Disk Information to view the HDD information; click
“S.M.A.R.T. Information” to view the working status of the HDD. Refer to the picture below.