User's Manual

SMT User Manual
Camera Management
23
4 Camera Management
4.1 Add/Edit Camera
4.1.1 Add Camera
The network of the SMT should be set before adding IP camera (see 13.1.1 TCP/IP
Configuration for details).
Refer to the pictures below. Click Add Camera in the setup panel or in the top right
corner of the preview window to pop up the “Add Camera” window as shown below. You can
quickly add or add the IP camera manually.
 Quickly Add
Select the cameras/panels and then click “Add” to add them. The system will automatically
identify the terminal type. Of course, you can choose the terminal type manually for some
panels or AI cameras. Then click “Add” to add cameras/panels. Uncheck “Default Password”
and enter the username and password manually if they are not the default one.
Click “Default password management” to modify the default password of each cameras/panels.