User's Manual

SMT User Manual
Wizard & Main Interface
21
The setup panel includes seven modules. Each module provides some function entries with
links for convenient operation.
Here we take Camera module as an example. The Camera module provides convenient links
such as “Add Camera”, “Edit Camera”, “Image Settings” and “Motion”. Click Camera to go to
the camera management interface as shown below.
Click the main menus on the top of the camera management interface to go to corresponding
interfaces. Refer to the picture below. For instance, you can go to system setup interface by
clicking “System” tag.
3.2.3 Main Functions
 Camera
The module covers the functions such as Camera Management (see Chapter 4 Camera
Management for details), Image Settings (see 5.2 Preview Image Configuration for details) and
Motion (see 11.4 Motion Configuration for details)
 Record
The module covers the functions such as Encode Parameters and Record Schedule and so on.
Please see Chapter 9 Record & Disk Management for details.
 AI/Event
The module covers the functions such as Body Temperature Settings, Mask Settings,
Combination Alarm, Exception, Sensor and Motion Alarm and Alarm Out Settings . Please
see Chapter 11 AI/Event Management for details.