User's Manual

SMT User Manual
Wizard & Main Interface
20
Button
Meaning
Disk status button. Click it to view the disk status.
Network status button. Click it to view the network status.
Information button. Click it to view system information.
Introduction of area②:
Icon / Button
Meaning
It shows the current login user.
Click it to go to the attendance configuration and search interface.
Click it to go to the people management interface, see 6 People
Management for details.
Click it to go to record search and backup interface, see 10.3 Record
Search, Playback & Backup for details.
Click it to go to playback interface (click on the tool bar at the
bottom of the live preview interface to set the default playback time),
see 10.2 Playback Interface Introduction for details.
Click it to pop up the setup panel, see 3.2.2 Setup Panel for details.
Click it to log out the system.
Click it and then select “Logout”, “Reboot” or “Shutdown” in the
popup window.
Introduction of area ③/④/⑤ :
Area ③ : Captured face picture display area. If the added device is a temperature
measurement and face recognition terminal, the body temperature will be displayed under the
captured face picture.
Area ④ : Real-time statistical information display area. The statistical information includes
total pass-by counts, over temperature counts, mask off counts, block list counts, stranger
counts and VIP counts
Area ⑤ : Camera list/real-time warning/intelligent detection display area.
3.2.2 Setup Panel
Click StartSettings to bring up the setup panel as shown below.