User's Manual

SMT User Manual
Wizard & Main Interface
16
Note:
 If you use the SMT with the PoE network ports, the online state of the internal Ethernet
port will be shown on the interface. Refer to the picture below. Please refer to 13.1.1 TCP/IP
Configuration for detail introduction of the internal Ethernet port.
⑥ Add Camera. Click “Refresh” to refresh the list of online IP cameras which are in the
same local network with SMT and then click to add the searched camera. Click “Add
All” to add all the cameras in the list. Click to delete the added camera. Click “Delete All”
to delete all the added cameras.