User's Manual

SMT User Manual
Wizard & Main Interface
14
3 Wizard & Main Interface
3.1
Startup Wizard
The disk icons will be shown on the top of the startup interface. You can view the number and
status of each disk quickly and conveniently through these icons ( : no disk; : unavailable
disk; : RW available disk).
You can quickly configure the 19 5 by wizard setup to make the 1VR work normally. You
must configure the wizard if you start the DVR for the first time (or click “Skip” to cancel the
wizard next time). Maybe different versions have different wizard steps. The following wizard
steps are for reference only.
Choose the language and locality as needed if it is the first time for you to use the wizard
and then read the privacy statement, checkmark “I have read and agree” and click “OK”.
Date and Time Configuration. The date and time of the system need to be set up if you
use the wizard for the first time. Refer to the following figure. Set the time zone, system time,
date format, time format and video format. The DST will be enabled by default if the time zone
selected includes DST. Click “Next” to continue.
System Login. Set your own password or use the default when you use the wizard for the
first time (the default username of the system is admin ); select the login username and enter
the corresponding password next time.