User's Manual

SMT User Manual
Remote Surveillance
98
Enter the serial number (click
on the tool bar at the bottom of the live preview interface to
see the serial number of the SMT), user name (the user name of the SMT, admin by default)
of the SMT, select the display language on the top right corner of the interface and then click
“Login” to go to the web client interface.
PPPoE Access
Click StartSettingsNetworkPPPoE to go to the “PPPoE” interface. Check “Enable”
in the “PPPoE settings” and then enter the username and password you get from your ISP.
Click “Apply” to save the settings.
Click StartSettingsNetworkNetwork Status to view the IP address of the SMT.
Open a web browser on your computer, enter the IP address of the SMT like
http://210.21.229.138 in the address bar and then press enter to go to the login interface. Enter
the username and password of the SMT in the interface and then click “Login” to go to the live
preview interface.
Router Access
Click StartSettingsNetworkTCP/IP to go to the “TCP/IP interface. Set the IP
address, subnet mask, gateway, preferred DNS and alternate DNS of the SMT.
Set the HTTP port (it is suggested to modify the HTTP port because the default HTTP port
80 might be taken up) and enable UPnP function in both the SMT and the router. If the UPnP
function is not available in the router, you need to forward the LAN IP address, HTTP port and
server port of the SMT to the router. Port mapping settings may be different in different routers,
so please refer to the user manual of the router for details.
Get the WAN IP address of the SMT from the router. Open a web browser on your
computer, enter the WAN IP address plus HTTP port like http://116.30.18.215:100 in the
address bar and then press enter to go to the login interface. Enter the username and password
of the SMT in the interface and then click “Login” to go to the live preview interface.
14.4
Web Remote Control
The supported browsers for remote access are IE8/9/10/11, Firefox, Opera and Chrome
(available only for the versions lower than 45) in Windows system and Safari in MAC system.
When you access the SMT through web client for the first time, you need to download and
install the relative components for normal preview and playback. Please refer to the tips in the
Note: If the WAN IP address is a dynamic IP address, it is necessary fo r you to use the domain name to
access the SMT. Click Start
Settings Network DDNS to set DDNS (see 13.1.4 DDNS Configuration
for
details). By using DDNS function you can use the domain name plus HTTP port like
http://sunshine.dvrdydns.com:100 to access the SMT via internet.