User's Manual

SMT User Manual
Device Management
94
Note: Resetting to the factory default settings will not change time zone.
13.4
Device Software Upgrade
Upgrade
You can click StartSettingsSystemInformationBasic to view MCU, kernel version and
firmware version and so on. Before upgrade, please get the upgrade file from your dealer.
The upgrade steps are as follows:
Copy the upgrade software (.tar) into the USB storage device.
Insert the USB storage device into the USB interface of the SMT.
Click StartSettingsSystemMaintenanceUpgrade to go to “Upgrade” interface.
Select the USB device in “Device Name” option and go to the path where the upgrade software
exists. Select the upgrade software and then click “Upgrade”. The system may automatically
restart during upgrading. Please wait for a while and do not power off the SMT during
upgrading.
13.5
Backup and Restore
You can back up the configuration file of the SMT by exporting the file to other storage devices;
you can recover the configuration to other SMTs which are of the same model with the SMT by
importing the configuration file to other SMTs for time saving.
Insert the USB storage device into the USB interface of the SMT and then click
StartSettingsSystemMaintenanceBackup and Restore to go to the interface.
Backup
Select the USB device in “Device Name” option; go to the path where you want to store the
configuration backup file and then click “Backup”; finally click “OK” in the popup window.
Recover
Note: The file system of the USB mobile device which is used for upgrading, backing up and restoring
should be FAT32 format.