User's Manual

SMT User Manual
FAQ
110
Fig 10-1 Fig 10-2
Q11. How to play the backup file?
a. Recorded video backed up by SMT: insert the USB device in which the recorded video
backup files is saved to the USB interface of the PC and then open the USB device path. The
recorded video can be backed up in the private format and AVI format by SMT.
 If you select the private format when backing up recorded video by SMT, a RPAS
compression package will be backed up to the USB device automatically along with the
recorded video data. Uncompress the “RPAS.zip” and then click “RPAS.exe” to set up RPAS.
After the setup is completed, open RPAS player and then click “Open Folder” in the middle of
the interface to select the record data. Refer to Fig 11-1.
Select camera in the resource tree on the left side of the interface to play the camera record.
Click on the tool bar under the camera image to enable audio. Refer to Fig 11-2.
 If you select the AVI format when backing up recorded video by SMT, the recorded video
backup data can be played by the video player which supports this format.
b. Recorded video backed up through web. The recorded video can only be backed up with
AVI format through web. The recorded video can be backed up to PC and played by the video
player which supports this format.
Note: The record will not have audio output if you disable the audio when recording by SMT. Please
see 91.1 Mode Configuration and 9.2 Encode Parameters Setting for details.