Thank you for purchasing our product. Please read this User’s Manual before using the product. Changes may be made without notice.
Table of Contents Safety Information Table of Contents ----------------------------------------------------------------------------- 2 Safety Information ------------------------------------------------------------------------- 3~5 Connection ---------------------------------------------------------------------------------- 6~8 Controls ----------------------------------------------------------------------------------------- 9 Menu Setup --------------------------------------------------------------------
MOUNTING ● Place the monitor on a secure table or have it properly mounted to the wall. Do not hang anything on the monitor. Caution: The wall mount must bear a minimum of five times the monitor’s net weight without causing damage. To mount your monitor to the wall, you will need to remove the base before attaching the wall mount. CLEANING ● Unplug the unit from the wall outlet before cleaning. ● Do not use liquid or aerosol cleaners. Use a dry soft lint-free cloth for cleaning.
Connection 1. Rear interface Explanation of connectors This section describes the jacks on the back panel of your monitor. There are several ways to connect devices. DC12V: Use only the power supply included with the monitor HDMI: (High-Definition Multimedia Interface) This is an external interface for transmitting digital audio and video data. VGA: Connect your computer, or other device with a VGA output, to this jack using a 15 pin D-sub cable.
Controls Viewing the Picture From the Connected Device 1. Plug in the monitor and the device if they aren't already plugged in. 2. Turn on the monitor and the device you want to view, for example a camera. 3. Repeatedly press the SOURCE button until you see AV displayed at the top of the monitor's screen. Note: If the picture from the DVR is blue and your device is connected to the VIDEO Input, you might be tuned to the wrong input.
Menu Setup Controls 9 BASIC ON-SCREEN DISPLAY SETUP (1) Press the MENU button to see the menu. (2) Press ＋ or － to select the menu item and press SOURCE button to select the Sub menu. (3) Press ＋ or － to adjust the settings. (4) Press the MENU button to return to the previous menu. OSD 1.
GEOETRY AUDIO 12 H-POSITION: Moves the image on screen either left (－) or right (＋). V-POSITION: Moves the image on screen either up (＋) or down (－). CLOCK: If the clock is not fine-tuned, you may observe periodic vertical bars of video noise on your image. These bars of noise are usually adjusted out when an Auto Configuration is performed. If the bars of noise are still present, this setting can be adjusted manually. PHASE: Adjusts the signal phase to improve sharpness when the image is fuzzy.
SLEEP-TIMER: Lets you set the monitor to turn off after a given amount of time (OFF, 15min, 30min, 45min, 60min) FUNCTION DLC: ON / OFF 3. HDMI Input mode PICTURE NOISE REDUCTION:（OFF、 LOW 、 HIGH） HSTART、HSIZE、VSTART、VSIZE: Only available under AV Mode. Adjust the OSD image horizontally or vertically by pressing the “-“/ “+” button. AUDIO 14 BASS: Adjustment range:0-100 TREBLE: Adjustment range:0-100 BALANCE: Adjusts how much audio is sent to the left and right (-50 to +50).
SLEEP-TIMER: Lets you set the monitor to turn off after a given amount of time (OFF, 15min, 30min, 45min, 60min) FUNCTION DLC: ON / OFF NOISE REDUCTION: Function unavailable HSTART、HSIZE、VSTART、VSIZE: Function unavailable 16 AUDIO BASS: Adjustment range:0-100 TREBLE: Adjustment range:0-1 BALANCE: Adjusts how much audio is sent to the left and right (-50 to +50). The intermediate value is 0.
Specifications Model Size Aspect Ratio Resolution (H x V) Colors M17LCBVH3 M19LCBVH3 17 inch 19 inch 4:3 1280 x 1024 16.
PRODUCT WARRANTIES AND INFORMATION EFFECTIVE JULY 8, 2008 VIDEO WARRANTY This statement of policy is in lieu of any other policy, expressed or implied, and no representative or person is authorized to assume for us any other liability or policy without our written consent. We cannot be held responsible for typographical errors.
RETURNED GOODS POLICY 1. RETURNS SENT WITHOUT PRIOR APPROVAL WILL NOT BE ACCEPTED. CREDIT WILL BE ISSUED UPON INSPECTION OF RETURNED UNITS. 2. No discounted item may be returned for credit or exchange. 3. An order of $3.00 for every $1.00 to be returned must accompany a request for return for stock adjustment. 4. There will be a minimum charge of 15% for handling and repacking where necessary.
