Manual

40/56
Swing Setup
SWING SETUP
------------------------
SWING NO. 1
1ST POS. NOT USED
2ND POS. NOT USED
SWING SPEED 30/SEC
CLEAR SWING CANCEL
RUN SWING
BACK
EXIT

Swing
Number
[1~10
]
Selects a Swing number to edit. If the
selected Swing is not defined, "NOT
USED" is displayed in the 1st Position and
the 2nd Position.

1st Position
2nd Position
[PRESET 1~255
]
Sets the 2 positions for a Swing function.
If the selected preset is not defined,
"UNDEFINED" is displayed as shown
below.
When a swing function runs, the camera
moves from the preset assigned as the
1st point to the preset assigned as the
2nd point in CW(Clockwise) direction.
Then the camera moves from the preset
assigned as the 2nd point to the preset
assigned as the 1st point in CCW
(Counterclockwise) direction. In case that
the preset assigned as the 1st point and
the preset assigned as the 2nd point are
same or only 1 Preset position is
assigned, the camera turns on its axis by
360° in CW direction and then it turns on
its axis by 360° in CCW direction.

Swing
Speed
[1
°
/sec. ~180
°
/sec.]
Defines Swing speed between the 2 Preset
positions from 1°/sec to 180°/sec

Clear Swing
[CANCEL/OK]
Deletes the data of the selected Swing.

Run Swing
Runs Swing for the test purposes to
check if it works properly.
SWING SETUP
------------------------
SWING NO. 1
1ST POS. PRESET5
2ND POS. NOT USED
UNDEFINED
OSD MENU
4