Manual

39/56
 Preset Scene Setup
EDIT SCENE - PRESET 1
------------------------
MOVE TO TARGET POSITION
[NEAR:SAVE /FAR:CANCEL]
 Preset Label Setup
EDIT LABEL - PRESET 1
------------------------
[ ]
----------
1234567890 OK
ABCDEFGHIJ CANCEL
KLMNOPQRST
UVWXYZabcd
efghijklmn
opqrstuvwx
yz<>-/:.
----------
○
1
Use the Joystick to move the camera to a desired
position.
○
2
Save the preset position by pressing
NEAR
key.
○
3
Press
FAR
key to cancel targeting the preset
position.
Edit the label of the selected preset to show on the
monitor when camera arrives at the preset. In the
Edit Label menu, the dark rectangular is the cursor.
As soon as finishing selecting an alphabet or a
number, the cursor moves to the next digit.
①
With
Left/Right/Up/Down
of the joystick, move
to a desired Alphabet or a desired number in the
Alphanumeric set. To select a desired Alphabet or
a desired number, press the NEAR key.
If you want to use a blank, select the double
quotation mark (" "). If you want to delete an
Alphabet or a number, use the back space
character (" ←").
②
If you complete the Label editing, move the
cursor to "OK" and press the NEAR key to save the
completed label. To abort the current change,
move the cursor to "Cancel" and press the NEAR
key.
OSD MENU
4
Current Cursor Position
[ ]
Back Space Char.Space Char.
----------
1234567890
ABCDEFGHIJ
KLMNOPQRST
UVWXYZabcd
efghijklmn
opqrstuvwx
yz<>-/:.
----------