Manual

35/56
Motion Setup
MOTION SETUP
------------------------
MOTION LOCK OFF
PWR UP ACTION ON
AUTO FLIP ON
JOG MAX SPEED 120/SEC
JOG DIRECTION INVERSE
FRZ IN PRESET OFF
<PARKING ACTION SETUP>
<ALARM INPUT SETUP>
BACK
EXIT
Sets the general functions of Pan/Tilt motions.

Motion
Lock
[ON/OFF]
If Motion Lock is set to ON, it is impossible
to set up and delete Preset, Swing, Pattern
and Group. It is possible only to run those
functions. To set up and delete those
functions, enter into OSD menu.

Power Up
Action
[ON/OFF]
Refer to “Other Functions" section.

Auto Flip
[ON/OFF]
Refer to “Other Functions" section.

Jog Max
Speed
[1
°
/sec ~360
°
/sec]
Sets the maximum jog speed. Jog speed is
inversely proportional to the zoom
magnifications. As the zoom magnification
goes up, the pan/tilt speed goes down.

Jog
Direction
[INVERSE/NORMAL]
Sets the Jog Direction. If this is set to
‘Inverse’, the view direction in the screen
is same as the direction of joystick. If this
is set to ‘Normal’, the view direction in
the screen is the reverse direction of
joystick.

Freeze
in Preset
[ON/OFF]
Sets Frame Freeze Function. This feature
freezes the scene on the monitor when
going to a preset. At the start point of a
preset movement, a camera starts freezing
the image of the start point. Camera keeps
displaying the image of the start point
during preset movement and does not
display the images which camera gets
during preset movement. As soon as
camera stops at preset end point, camera
starts displaying live images which it gets
at the end preset point. This feature also
reduces bandwidth when working with
digital systems or digital network systems.
This function availability should be
different by models.
OSD MENU
4