Color Dome Camera Owner's Manual

CAMERA INSTALLATION
1. CONNECT POWER CABLE
1) WHEN USING 12 VOLTS DC (constant voltage 600 mA)
-CONNECT ACCESSORY CABLE TO THE CABLE LEAD
OF THE CAMERA AND CONNECT 12V DC POWER SUPPLY.
2) WHEN USING 24 VOLTS AC (40 Volt Amps)
3) CONNECT VIDEO CABLE
-CONNECT BNC CABLE TO THE BNC JACK.
4) CONNECT RS-485 CABLE
-CONNECT 2WIRE CABLE TO THE 485PORT AS BELOW.
YELLOW:VIDEO OUT
POWER SUPPLY
CONNECT
POWER INPUT:RED
CENTER:(+)
CONNECT
BLACK:(-)
CAMERA RED(+)
POWER SUPPLY
AC 24V
5