HT-7246IHR 540 Line Color Dome Camera Intensifier Series Wall & Ceiling Mountable 200 New Highway Amityville, NY 11701 631-957-8700 www.specotech.com Please read this manual thoroughly before operation and keep it handy for further reference.
Contents Package Contents 3 Precautions 4 Camera Installation 5~6 Internal Components 7 9~10 Features ---------------------11~12 Operating Your Camera * SET UP --------------------------------------------------------------13 * SET UP LENS-------------------------------------------------------14 * SHUTTER SPEED CONTROL ---------------------------------15~18 * BACK LIGHT---------------------------------------------------------19 * AUTO GAIN (AGC) --------------------------------------------- ---20
PRECAUTIONS PACKAGE CONTENTS Please make sure that the following items are included in the package: THIS DOME CAMERA SHOULD BE ONLY INSTALLED BY QUALIFIED PERSONNEL TO PREVENT A FIRE OR ELECTRICAL HAZARD PLEASE USE PROER POWER CABLE THE DOME COVER SHOULD BE TREATED WITH CARE DO NOT CELAN THE COVER WITH AN ABRAISIVE CLEANING MATERIAL - PLEASE USE A SOFT CLOTH OR TISSUE TO CLEAN THE DOME COVER THERE ARE NO USER-SERVIEABLE PARTS INSIDE.
CAMERA INSTALLATION CHAMELEON DOME INSTALLATION 4. Connections: If you wish to change the color of the HT-7246IHR, place the Chameleon Dome over the camera 1. When using 12-Volts DC (constant voltage 600mA) -CONNECT POWER TO THE POWER JACK. POWER INPUT:RED connect CENTER:(+) 2. When using 24-Volts AC (40 VA) -CONNECT ACCESSORY CABLE TO THE POWER JACK AND CONNECT 24V AC TO THE LEAD.
INTERNAL COMPONENTS 1. 2. Joy Stick Mechanical (2) JOY STICK UP (1) DC Auto iris 2.8~11mm Lens RIGHT LEFT DOWN (1) DC AUTO-IRIS LENS Adjust between TÅÆW (TELE ÅÆ WIDE) to set the angle (focal length) Set the focus by adjusting ∞ÅÆN NOTE: BOTH OF THE ABOVE ADJUSTMENTS GET LOCKED INTO POSITION THROUGH THE USE OF "LOCKING HANDLES".
Features ♣ SLC ♣ OSD (ON SCREEN DISPLAY) When the image is in front of strong background lighting, your camera allows you to get a properly balanced image. ♣ INTENSIFIER All camera functions are menu driven for easy use. ♣ Dynamic Noise Reduction 1/3 inch high density CCD and digital processor permit high quality pictures to be captured in very low light conditions.
Operating your camera ◈OSD Menu Setting ◈OSD Function LENS OPTION ●DC ●MANUAL SHUTTER ●OFF ●F/L UP ●MANUAL WHITE BALANCE ●ATW ●AWC MANUAL● LEFT SET BY JOY STICK RIGHT SLC – ( Speco Light Compensation ) ●OFF ●LOW ●MIDDLE ●HIGH DOWN SET UP MENU Auto Gain ●OFF ●LOW ●MIDDLE ●HIGH REDUCE NOISE ●OFF ●LOW ●MIDDLE ●HIGH INTENSIFIER ●AUTO ●OFF NEXT PAGE ●CAMERA TITEL ●DAY/NIGHT ●SYNC ●MOTION ●PRIVACY ●REVERSE ●DETAIL ●DEFAULT ●PAGE 1 Push the Joy stick for one second, and the OSD appears on the scre
Operating your camera - SET UP 1. Press the SET button (JOYSTICK) to access the SETUP mode. ●SETUP menu is displayed on the monitor screen. Operating your camera - 1) Setting up the LENS Select the lens pressing the RIGHT button. ① On the SETUP menu screen, move the arrow indicator to the lens using the UP or DOWN button. ② Select the desired feature using the LEFT or RIGHT button. 2. Select the desired feature using the UP or DOWN button.
Operating your camera – SHUTTER SPEED CONTROL① 2) Shutter status and speed control You can control brightness of the screen by the shutter speed. ① Press the SET button to display the setup menu and move the arrow indicator to ‘SHUTTER’ using the UP or DOWN button. ② Set ‘SHUTTER’ to the desired mode using the LEFT or RIGHT button. ▶OFF : Deactivation ▶When DC LENS is selected, press the SET button To control the BRIGHTNESS.
Operating your camera –SHUTTER SPEED CONTROL ② ▶MANUAL : When setting the shutter speed manually, You can select a speed from ‘1/60’ to ‘1/200,000’sec ▶ELC : You can control the BRIGHTNESS. ③ When completed, press ‘SET’ Notes ●Avoid pointing the camera directly at a fluorescent lamp. ●When the SHUTTER menu is set to FLK mode, the INTENSIFIER will not work.
Operating your camera - BACKLIGHT 3) SLC (Speco Light Compensation) – BLC/WDR A built-in SR chip provides intelligent light level control to overcome severe Backlight conditions. ① Press the SET button to display the SETUP menu and move the arrow indicator to ‘SLC’ using the UP or DOWN button. ② SET ‘SLC’ to the desired mode using the LEFT or RIGHT buttons. ▶OFF ▶LOW 19 ▶MIDDLE ▶HIGH 4) AUTO GAIN (AGC) AGC allows a brighter picture in low light conditions.
Operating your camera - WHITE BALANCE 5) WHITE BALANCE ① Press the SET button to display the SETUP menu and move the arrow indicator to ‘WHITE BALANCE’ using the UP or DOWN button. ② Set ‘WHITE BAL.’ to the desired mode using LEFT or RIGHT button. ▶MANUAL : To fine adjust, select the Manual mode. You can increase or decrease the red or blue factor while monitoring the difference on the screen. Set to ‘MANUAL’ mode and press the SET button.
Operating your camera - Operating your camera - INTENSIFIER 6) REDUCE NOISE (Dynamic Noise Reduction) DNR reduces the video noise on the screen. ① Press the SET button to display the SETUP menu and move the arrow to ‘REDUCE NOISE’ using the UP or DOWN button. ② SET ‘REDUCE NOISE’ to the desired mode using the LEFT or RIGHT button. INTENSIFIER 7) INTENSIFIER Allows you to get clear images under night or low light conditions.
Operating your camera - CAMERA TITLE① 8) NEXT PAGE ① Press the SET button to display the SETUP menu and move the arrow indicator to ‘NEXT PAGE’ using the UP or DOWN button. ② SET ‘NEXT PAGE’ to the desired mode using the LEFT or RIGHT button. (1) CAMERA TITLE ① Press the SET button to display the SETUP menu and move the arrow indicator to ‘CAMERA TITLE’ using the UP or DOWN button. ② SET ‘ON’ using the LEFT or RIGHT button.
Operating your camera – DAY/NIGHT/SYNC (2) COLOR : You can choose color and B/W mode electronically. ① Press the SET button to display the setup menu and move the arrow indicator to ‘COLOR’ using the UP and DOWN button. ② SET ‘COLOR’ to the desired mode using the LEFT or RIGHT button. (3) SYNC : Two SYNCHRONIZATION modes are available - INTERNAL and EXTERNAL LINE-LOCK. ① Press the SET button to display the setup menu and move the arrow indicator to ‘SYNC’ using the UP and DOWN button.
Operating your camera – MOTION DETECTION (4) Whenever your camera detects motion, THE WORDS “motion detected’ will appear on the screen. ① Press the SET button to display the setup menu and move the arrow indicator to ‘MOTION’ using the UP and DOWN button. ② SET ‘MOTION’ to the desired mode using the LEFT or RIGHT button. ▶OFF : Deactivation ▶ON : MOTION. activated -Press SET button. -Move the arrow indicator to ‘AREA SET’ using UP and DOWN button, and then press the SET button.
Operating your camera - PRIVACY (5) PRIVACY : To mask area that you want to be private. ① Press the SET button to display the setup menu and move the arrow to ‘PRIVACY’ using the UP and DOWN button. ② SET ‘PRIVACY’ to the desired mode using the LEFT or RIGHT button. Operating your camera - REVERSE (6) REVERSE ① Press the SET button to display the setup menu and move the arrow indicator to ‘REVERSE’ using the UP and DOWN button. ② SET ‘REVERSE’ to the desired mode using the LEFT or RIGHT button.
Operating your camera - DETAIL (7) DETAIL ① Press the SET button to display the setup menu and move the arrow indicator to ‘DETAIL’ using the UP and DOWN button. ② SET ‘DETAIL’ to the desired mode using the LEFT or RIGHT button. Operating your camera - RESET/RETURN (8) DEFAULT : Use to reset your camera to FACTORY DEFAULT SETTINGS. (9) PAGE 1 : Save the setting of NEXT PAGE function, and then move to SET UP menu.
Troubleshooting If you have trouble operating your camera, refer to the following. Problem Solution Solution Problem ●Check that the power cord and line connection between the camera and monitor are proper. ●Check that you have properly connected VIDEO cable the camera VIDEO output jack. The color of the picture is not matched. ●Check that you have properly set the ‘WHITE BALANCE’ menu The image on the screen flickers.
DIMENSIONS SPECIFICATIONS ITEM HT-7246IHR Power Source 12VDC & 24VAC ( Dual Voltage ) Power Consumption 230mA (DC) / 3.8W (AC) I mage Sensor 1/3” SONY SUPER HAD CCD, Total Pixels 811(H) x 508(V) , 1/3” CCD Effective Pixels 768(H) x 494(V) , 1/3” CCD LENS Type DC AUTO IRIS VARIFOCAL 2.8~11mm Maximum Aperture Ratio 1 : 1.3 ~2.0 Scanning System 2 : 1 Interlaced 525 Lines / 60 Fields / 30 Frames Synchronization Internal / Line Lock selectable Video Output 1.
WARRANTY 39
