User Guide

1-64 + preset and 101~200 + preset are used for preset and 65-100 + preset used for functions.

For example, to enter OSD MENU, press the button 95 +PRESET.

Numbe

Note Function

1 ~ 64, 100~200 +Preset PRESET Executing Preset 1 ~ 64

65 + Preset PRESET STATUS Display Preset Status

66 +Preset AUTO SCAN Executing Auto Scan

67 +Preset AUTO FLIP Selectable On/Off/Auto in Auto Flip function

71~78 +Preset GROUP TOUR Executing Group Tour #1 ~ #8

81~88 +Preset PATTERN Executing Pattern #1 ~ #8

91 + Preset ZERO POSITION

92 + Preset FREEZE

93 + Preset BLC MODE Selectable On/Off in BLC function

94 + Preset D/N MODE Selectable Day/Night Mode (Auto/Day/Night Mode)

95 + Preset OSD MAIN MENU To enter OSD Main Menu

96 + Preset FOCUS ADJUST Focus adjusting

97 +Preset ALARM Selectable Enable/Disable all Alarms

<Quick Operation Keys Table 2> Use these function keys if controller has these keys>

* 65 + preset : Status Report , If user presses any key, it disappears.

Menu Function

Tilt Up / Down Sub menu cursor moves up / down

Pan Left / Right Enter to the sub menu or status change or decrement

Focus Near Using for Enter key when user select YES or NO

Focus Far Using for function changing keys when set coordinate

Zoom Tele Status cursor to the right

Zoom Wide Status cursor to the left

QUICK OPERATING KEYS