User Guide

H. PATTERN SET

8 programmable patterns are available with 16 characters of title.

After setting the data to each pattern # 1~8, 81~88+ preset buttons are working as Pattern # 1~8.

H-1. PATTERN SET –PATT NO.

Up to 8 programmable user-defined patterns set by the joystick are available.

H-2. PATTERN SET –PATT TITLE

To set PATTERN TITLE, select up to 16 characters using Joystick to the left or right.

Press ZOOM TELE button moves to the next character from the left to the right direction and

ZOOM WIDE button moves to the next character from the right to left direction (Space displays

when  appears) Pattern title is not displayed on the monitor, but only for the reference of user.

H-3. PATTERN SET –DATA FILL

To fill the programming data, press FOCUS FAR button in order to start the data fill up. Filling data

is programmed according to the joystick movement. Press FOCUS FAR button again in order to

escape.

H-4. PATTERN SET –SAVE

To saving the memorized data, move the joystick to the right when the cursor is on SAVE. Then the

cursor moves to the PATT NO.02 in order to prepare next pattern no.

H-5. PATTERN SET –EXIT

To escape this page, move joystick to the right

OSD MENU SETTING

PATTERN SET

PATT NO : 01

PATT TITLE: PATTERN01□□□□□□□

DATA FILL : 0%

SAVE

EXIT

DEFAULT SETTING