User Guide

21
G. PRIVACY SET
4 Privacy masking zones are available to block out areas of the scene.
G-1. PRIVACY SET – PRIVACY NUMBER.
Up to 4 privacy masking zones are available.
G-2. PRIVACY SET – DISPLAY.
Move joystick to the right or left direction to set ON in order to show the selectable block in the
center of the monitor. This block appears as a translucent blue square when turned ON. The
default setting is OFF.
G-3. PRIVACY SET – ACTION (MOVE / ADJUST)
To set the privacy area, press FOCUS FAR button when the MOVE MODE is showing. Then use
the joystick to the user defined area in order to set the privacy zone. Then press FOCUS FAR
button again to escape from MOVE MODE.
To adjust size of the privacy zone, move the joystick to the right or left direction when the cursor is
on ACTION. After move mode changed to ADJUST MODE, press FOCUS FAR button in order to
adjust the size of the privacy zone. The size of he privacy zone can be adjusted by using the
joystick up down or left right,. After adjusting size of the privacy zone, press FOCUS FAR button to
escape ADJUST mode.
z ADJUST: You can change the masking size by using the joystick to the left or right direction
z MOVE: You can move the privacy zone by using joystick to the left or right direction
G-4. PRIVACY SET – SAVE
After setting the privacy masking zone, to save the data, move the joystick to the right direction
when the cursor is on SAVE. After saving the data, the cursor moves to PRIVACY NO.2
automatically to prepare the next privacy masking zone.
G-5. PRIVACY SET –EXIT
To escape this page, move the joystick to the right
OSD MENU SETTING
PRIVACY SET
PRIVACY NOMBER : 01
DISPLAY : OFF
ACTION : MOVE
SAVE
EXIT
DEFAULT SETTING