User Guide

D. PRESET SET

To enter PRESET SET, move the joystick to the right direction.

D-1. PRESET – PRESET NO.

Up to 164 numbers of preset positions are available. Move joystick to the right or left direction to

select a preset no.

D-2. PRESET – PRESET ID

To set preset ID, select up to 16 characters using Joystick to the left or right.

Press ZOOM TELE button moves to the next character from the left to the right direction and

ZOOM WIDE button moves to the next character from the right to left direction

(Space displays when  appears)

D-3. PRESET – PAN: XXX.X TILT: XX.X

Press FOCUS FAR button in order to set the preset position, then use the joystick to move the

camera to the position where the memorized preset no. is needed. Then press FOCUS FAR button

again after setting a preset location.

D-4. PRESET – SAVE

Move the joystick to the right when the cursor is at SAVE and then the cursor will be located on the

Preset ID for the continuous preset No. setting.

D-5. PRESET – EXIT

To escape this page, move joystick to the right .

PRESET SET

PRESET NO :001

PRESET ID :PRESET001-------

PAN :XXX.XX TILT : XXX.XX

SAVE

EXIT

DEFAULT SETTING

OSD MENU SETTING