User's Manual

5.1.8. Sensor Event Indicator

The indicator flashes when the alarm sensor is operating.

Note Double click the sensor indicator with the left mouse button to

start the Log Viewer. The log viewer shows the list of occurred

events by date and type of the event.

This information can be printed or sent in files that can be

displayed in Microsoft excel.

5.1.9. Recording Status Indicator

The tape icon flashes to show the recording status and when it does not flash, it has been deactivated to show that it is not

recording.

Note When all channels are in “Watch Mode,” they are not recording.

5.1.10. Audio Input Indicator

When the audio is being recorded, its status will be shown in graphical display.

5.1.11. Start Recording

Recording of all the cameras installed will be done according to the user settings.

5.1.12. Stop Recording

Stop recording of all the cameras. Click [Stop recording] button and a warning

message will appear. When the recording does not start for more than 5

minutes, the recording will start again automatically.

5.1.13. Search Recorded Image (Viewer)

Start the Viewer to search recorded images.

(Refer to Using Viewer section for detail instructions)